GR Series Autoclave

Opening way: flip top
Type DA: Fully automatic, basic model
Type DF: Automatic water feeding and fast cooling based on Type DA
Type DR: Automatic drying function based on Type DF

Capacity:60L/85L/110L

Main Features


  • Dia of Sterilization chamber: The heavy-gauge sterilization chamber in a diameter of40cm offers a massiva space to satisfy various sterilization requirements.
  • Microcomputer control system: “Inspiration” fast speed Microcomputer intelligent control system ishighly robust to not only realize the total-process controls of sterilization, butalso enable convenient maintenance, inquiry, calibration ,recording and upwardscalability in the future. It allows three tiers of administrations, i.e. user,user administrator and engineer, to guarantee satisfactory use and managementof autoclave
  • Waste sterilization Mode: dedicated waste sterilization proceduresare established for effective sterilization of lab wastes.
  • Drying function: Thoroughly dryingaccording to CE standards
  • Cooling lock open temperature: Eachprocedure can set different cooling lock open temperatures according to thethermal inertia of the sterilization object so as to prevent the user fromopening the cover and hence getting burnt when the sterilizationobject(particularly liquid object) is still in an unsafe state.
  • SterilizationTemperature:105-138℃

 

Function


  • Mechanical interlocking:the unique “eight-column evenlydistributed” interlocking device is safer and more reliable than commoninterlocking devices
  • Electric double inner locks:enable the control system tomonitor the temperature and pressure in the sterilization chamber on areal-time basis and disable opening of the sterilization chamber cover untilthe safe temperature and pressure are reached, hence guaranteeing the personalsafety of the operator.
  • Six preset procedures:Six sterilization procedures and warming procedures are preset forthe sterilizing ,warming and drying of solids and liquids, the melting andwarming of agars. 
  • Agar processing:It can heatand melt down and preserve heat of agars or preheat the sterilization chamber.
  • Timed startup: It is possible to preset a time program so that the autoclavecan be automatically started for sterilization according to the presetschedule.
  • Memory system: The operator can set thesterilization parameters and create as many as 60 precedures that can bereadily used.
  • Steam discharge control: Upon completion ofsterilization procedure, the vent valve can automatically open to dischargesteams at the preset temperature.
  • Calibration interface:Temperature and pressurecalibration interfaces are available for calibration purpose
  • Automatic water feeding: Exempt the convenience of frequent water feeding;water level sensors are installed to automatically stop the autoclave and giveout alarms when water is running out.
  • Staurated Steam Monitoring: The system can automatically monitor the dischargeconditions of cold air so as to guarantee a sterilizing environment of puresteams and optimal sterilization effects.

Function Table
GR60DRGR60DFGR60DA
GR85DRGR85DFGR85DA
GR110DRGR110DFGR110DA
Sterilization mode

Solid mode: 

Heating-Sterilizing-Exhausting and air cooling

YESYESYES

Solid withdrying mode:

Heating-Sterilizing-Exhaustingand air cooling-water drainage-drying

YESNONO

Liquid mode:

Heating-sterilizing-Precooling-Steam exhausting
YESYESYES

Waste Mode:

Heating-Sterilizing-Steam exhausting and air cooling
YESYESYES

Waste Mode:Heating-Sterilizing-Steam exhausting and air cooling

YESYESYES
Agar Mode:
Heating-Melting-Warming
YESYESYES
Automatic water feedingSTANDARDSTANDARDNO
Water level sensorSTANDARDSTANDARDNO
Cooling fanSTANDARDSTANDARDOPTIONAL
Load thermometerOPTIONALOPTIONALOPTIONAL
PrinterOPTIONALOPTIONALOPTIONAL
Memory systemCreate 60 proceduresCreate 60 proceduresCreate 20 procedures


Specification Table


GR60DR GR85DR GR110DR
GR60DF GR85DF GR110DF
GR60DA GR85DA GR110DA

Capacity(L)

60

85

110

Chamber Dimension(Dia*H, mm)

ф400×505

ф400×700

ф400×895

Chamber material

SUS304

Rated power supply

220V/50Hz

Rate power(W)

2900

4600

4600

Sterilization temperature

105—138℃

Range of sterilization time

1—300minutes

Melting temperature

60—100℃

Range of melting time

1—300minutes

Warming temperature

45—60℃

Range of melting time

1—9999minutes

Preset range of drying time

1-300minutes(only for GR60DR/GR85DR/GR110DR)

Preset range of cooling lock OPEN temperature

40-99℃ for solid and agar modes and 40-80℃ for liquid and waste modes

Preset range of steam exhausting temperature

73—104℃

Exhausting mode

Fully automatic internal discharging

Embedded with a steam trapping bottle

Way of opening lid

Flip type

Preset range of timer

0 minute-6 days delayed

Preset range of timer

0-0.6MPa

Preset temperature of chamber lid opening

presettable

Rated working pressure

0.27 MPa

Controller

“inspiration”fast-speed microcomputer intelligent control system

Safety device

“eight-column evenly distributed” interlockingdevice, electric double inner locks, dry scorch protection, overpressureprotection, safety valve, over temperature protection, over current and shortcircuit protection, leakage protection, cooling lock, anti-scald chamber coverand bench, automatic troubleshooting

 Accessories

drainage hose, water plate, exhaustbottle


Two stainless steel baskets

Two stainless steel baskets

Three stainless steel baskets

Other accessories

Stainless steel pail, printer, cooling fan, Articlethermometer optional









Tandard Accessory

GR60DA/GR60DF/GR60DRStainless Steel Basket:ф370mm(Dia)×200mm(H)

GR85DA/GR85DF/GI85DRStainless Steel Basket:ф370mm(Dia)×280mm(H)

GR110DA/GR110DF/GR110DR Stainless SteelBasket:ф370mm(Dia)×260mm(H)

 

Optional Accessory : Stainless Steel Basket

Note 1:Diameter and height of baskets canbe custom-made. 










Standard Accessory:cooling fan

GR60DF/GR60DR/GR85DF/GR85DR/GR110DF/GR110DR 

Standard Accessory:cooling fan

GR60DA/GR85DA/GR110DA











OptionalAccessory : stainless steel pails

Size 1:ф315mm(Dia)×200mm(H)

Size 2:ф240mm(Dia)×200mm(H)










Optional Accessory : Article thermometer

 







Optional Accessory : printer















OptionalAccessory 5  printing set (pressuresensor + printer)

 

Published:2012-12-07